The adhesive is a high-strength, water-based, and easy-to-spread product designed for installing vinyl floor coverings like planks, sheets, tiles, etc. onto most types of subfloor surfaces. The vinyl adhesive will become tacky and is able to grab resilient floors for easing installation works especially when the subfloor is not 100% even. This adhesive has very long workability, up to 12 hours! Low VOC emission, just 4.15 g / L. It is ten times below the limitation rate is requiring according to SCAQMD rule 1168 (50g/L). The product is very convenient if you are installing a vinyl parquet. AS-5800 does not require any additional application or cleaning if you want to change the position of glued material. The time for relocation operation has a limit of up to 2 hours. You can easily install any type of floor without having to be a professional installer.
Installation
Apply vinyl adhesive using a 2.4 mm V-notch trowel and wait until it dries and becomes tacky. This usually takes about 30 minutes. The process is very simple and does not require much experience as the adhesive has a minimum workability time of 12 hours. This allows you to take your time and go carefully and accurately. Incorrectly installed vinyl planks can be removed and replaced again without removing the adhesive or reapplying it. Please take the time to watch the video below. The video has a full explanation of how it works.
Vinyl Adhesive is ideal for vinyl plank flooring, vinyl sheet, vinyl tiles, vinyl wall-based, Vinyl Composition Tile (VCT), vinyl floor maintenance, concrete, OSB panels, wood, hardboard, etc.
Sticks fast
High strength and excellent grab
Ready-mixed, easy to use
Installation and clean-up are simple
Good residual tack
Long working time
Low odor and low emission
Environmentally friendly
Please pay attention, that this type of flooring is not recommended for rooms with high temperatures and high levels of direct sunlight. Both flooring and vinyl flooring adhesives can be negatively affected.